What are the common materials used for sheet metal processing?

The Raw Materials Commonly Used In Precision Sheet Metal Processing Are Cold-Rolled Steel Plates, Electrolytic Plates, Galvanized Steel Plates, Stainless Steel Plates, Aluminum Plates, Copper Plates. The Following Introduces Their Properties Respectively.

1.1 Sheet Metal Processing Cold Rolled Steel Plate (SPCC)

    Cold Rolled Steel Sheet Is The Abbreviation Of Ordinary Carbon Structural Steel Cold Rolled Sheet. It Has The Characteristics Of Good Surface Quality, High Dimensional Accuracy, Good Mechanical Properties Process Performance, But Easy To Rust. Commonly Used Surface Treatments Include Color Zinc Plating, Blue Zinc Plating, Nickel Plating, Spraying, Silk Screen Printing, Etc.

1.2 Electrolytic Plate (SECC)

    The Cold-Rolled Steel Sheet Is Treated With Electroplating Acid Passivation To Deposit A Zinc Layer Of Zinc Atoms On The Surface. The Surface Is Easily Oxidized Rusted By Air. Electrolytic Plates Are Usually Treated On The Surface. Sections With Higher Requirements Can Be Rust-Proofed By Silver Paint. Precision Sheet Metal Processing Appearance Parts Can Be Powder-Coated On The Surface.

1.3 Alu-Zinc Plate

    Galvalume Sheet Is A Steel Sheet Made Of Aluminum-Silicon Alloy, Which Has The Characteristics Of Good Heat Resistance Corrosion Resistance. Common Surface Treatments Include Phosphating, Painting, Silk Screen Printing, Etc.

1.4 Stainless Steel Plate

    Commonly Used Stainless Steel Grades Are SUS304, SUS316, 1Cr18Ni9Ti. They Are Non-Magnetic, Corrosion-Resistant, Bright, Strong, Elastic, Plastic, High-Temperature Oxidation-Resistant, Difficult To Process But With Good Welding Performance, Expensive Material Cost. They Are One Of The Preferred Materials For Precision Sheet Metal Processing. Commonly Used Surface Treatments Include Passivation, Black Oxidation, Wire Drawing, Electropolishing, Electrophoresis, Etc. If There Are Special Needs, Surface-Treated Stainless Steel Materials Need To Be Used.

1.5 Aluminum Plate

    Common Grades Are 5052 6061. Anti-Rust Aluminum Hard Aluminum Are Commonly Used For Lighter Softer Materials. They Have Good Corrosion Resistance, Electrical Conductivity Thermal Conductivity, Low Strength, Good Plasticity, Good Processing Technology, Good Welding Performance, But The Sheet Metal Processing Strength Is Low The Price Is Expensive. Common Surface Treatments Include Wire Drawing, Sandblasting, Oxidation, Nickel Plating, Spraying, Silk Screen Printing, Etc.

1.6 Copper Plate

    Copper Plate Is Copper-Zinc Alloy, The Common Grade Is H62. Common Surface Treatments Are Nickel Plating Black Oxidation.

Shenzhen Huiwen Intelligent Manufacturing Technology Co., Ltd. Is A Professional Technical Enterprise Manufacturer Specializing In Precision Prototype Models , Robot Model Production, Auto Parts Rapid Prototypes, Rapid Prototype Production, Rapid Prototyping Other Businesses. We Can Only Make Samples Such As Resin Printing, High-Toughness Parts, High-Temperature Resistant Parts, Transparent Parts, Translucent Parts, Etc., But Also Provide Proofing Of Aluminum Alloy Parts, Copper Parts Sheet Metal Parts. At The Same Time, The Surface Treatment Of The Prototype Can Be Polished, Sprayed, Silk-Screened, Electroplated, Anodized. Our Models Are Widely Used In Robotics, Medical, Aviation, Automobiles, New Energy, Semiconductors, Industry Other Fields. The Company Has A Professional Team With More Than 10 Years Of Prototype Production Experience Technical Support. They Provide Strong Technical Guarantees For The Quality Long-Term Development Of The Company's Products. In The Future Development, Our Company Adheres To The Service Concept Of "Quality-Oriented, Efficiency First" Contributes Our Strength To The Development Of New Products For Our Customers!