CNC machined parts are orientated to each other.

In The Field Of Mechanical Processing , Precision CNC Processing Actually Refers To CNC Processing . First, The Drawings To Be Processed Are Programmed Into The Program, Then The Computer Is Connected To The CNC Machine Tool. The CNC Machine Tool Is Instructed To Operate Through Programming To Complete The Precision Parts Processing .

Precision CNC Machining Is Mainly Suitable For Small Batch Large Batch Processing Of Various Spare Parts . The Precision Of CNC Machined Parts Is Very High, So It Serves The Precision Parts Processing Of Different Professions: 

First Of All, Before CNC Parts Processing, It Is Necessary To Clearly Understand The Process Flow, Clearly Know The Location, Shape, Drawing Standards Of The Workpiece To Be Processed, Know The Content Of The Next Processing Step.

Before Processing Raw Materials, The Standard Of The Blank Should Be Measured To See If It Meets The Requirements Of The Drawing. It Is Necessary To Carefully Check Whether Its Placement Is Consistent With The Programming Instructions. After The Rough Processing Of The Processing Technology Is Completed, Self-Inspection Should Be Carried Out In Time To Adjust The Erroneous Data In Time:

( 1) Whether The Mechanical Parts Are Loose During The Processing;

(2) Whether The Parts Processing Technology Is Correct ;

(3) Whether The Standard The CNC Part Processing Part To The Reference Edge (Reference Point) Meets The Requirements Of The Drawing;

Position Standards Between CNC Machining Parts:

After Checking The Position Standard, The Rough Processing Shape Ruler Should Be Measured (Arc Outside). After The Rough Processing Is Confirmed, The Parts Are Fine-Processed. Before Fine Processing, The Shape Standard Of The Drawing Part Is Self-Checked: The Basic Length Width Standard Of The Processing Part Of The Vertical Surface Is Checked; The Base Point Standard Marked On The Drawing Is Measured For The Processing Part Of The Inclined Surface. After The Self-Inspection Of The Parts Is Completed, The Workpiece Can Be Removed Sent To The Inspector For Special Inspection After Confirming That It Is Consistent With The Drawing Process Requirements. When Encountering Small Batches Of Precision CNC Parts, The First Piece Must Be Confirmed To Be Qualified Before Batch Processing .