What are the methods of cnc parts machining control accuracy?

The Quality Control Methods For CNC Parts Processing Include Machine Tool Precision Testing, Parts Product Testing, Process Monitoring. The Quality Control Methods Are Closely Linked. If The Impact Of Any Link Leads To "One Misstep Leads To Eternal Regret", Let's Take A Look At The Three Methods Below.

1. Machine Tool Accuracy Test:

In This Mode, Check The Alignment Movement Accuracy Of The Machine. Check Various Other Parameters Of Precision Machining , Such As The Orientation Of The Spindle, Brackets, Axes, Etc. The Spindle Should Be Perpendicular To The Table. The Angles Bends Of The Axes Must Be Accurate. Check The Linear Axes.

2. CNC Parts Processing  Product Testing:

In This Mode, The Dimensions Position Of The Parts Are Checked. This Also Includes Checking Parameters Such As Positioning, Surface Finish Form. Depending On The Requirements Application, Dimensional Geometric Tolerances Are Also Checked.

3. Process Monitoring:

This Involves Checking The Process Steps At Every Stage To Avoid Process-Related Errors, Which Can Lead To Defective Products Unnecessary Manufacturing Delays. There Are Different Stages In The Product Life Cycle, Starting With Ideation Conceptualization. This Is Followed By Design, Feasibility Studies, Analysis, Pilot Production Phase, Testing, Serial Production, Etc. Quality Inspection Here Involves All Levels.

CNC Parts Processing Has A Wide Range Of Applications, Involving Aerospace, Robotics, New Energy, Medical, Wind Power Generation, Optical Equipment Other Industries. Compared With Other Ordinary Parts, Its Main Feature Is Precision, The Tolerance Can Reach Plus Minus 0.005MM, Even More Precise. Of Course, Its Price Is Much Higher Than Other Parts. Due To The Expensive Machine Low Processing Efficiency, The Processing Fee Is Relatively High. The Reason Why The Processing Cost Of Precision Lathe Parts Is Higher Than That Of Other Hardware Parts Is Because Of The Turning Processing Technology, Which Has High Precision, Low Speed Low Output. It Is A High-Performance, High-Precision, Low-Noise Automatic Lathe.

Shenzhen Huiwen Intelligent Manufacturing Technology Co., Ltd.

1. Provide CNC (Computer Gong, Machining Center ), CNC Lathe, Ordinary Lathe, Milling Machine, Wire Cutting, EDM, Multi-Axis (3-Axis/4-Axis/5-Axis) Processing Services;

2. Fast Proofing Speed (Fastest Shipment On The Same Day), Obvious Price Advantage In Bulk;

3. Both Metal Non-Metal Materials Can Be Processed;

4. Provide One-Stop Service Of Drawing Processing Post-Processing;

5. Maximum Processing Size: Maximum 2200mm (Disassembly Is Limited By Size).