What are the parts that can be machined on a precision CNC machining centre?

CNC Machining Center Is A Kind Of CNC Machine Tool, Which Is Controlled By CNC System. It Is Developed On The Basis Of CNC Milling Machine. Compared With CNC Milling Machine, It Has The Function Of Automatic Tool Changing In Tool Magazine. It Can Complete Multiple Processes Such As Drilling, Countersinking, Reaming, Boring, Tapping, Milling, Etc. In One Clamping, Which Greatly Improves Production Efficiency.

The Environmental Requirements For CNC Machining Center Installation Generally Include Foundation, Ambient Temperature, Ambient Humidity, Power Grid, Grounding Wire Interference Prevention. The Foundation Is An Important Basis For The Machining Center To Maintain Accuracy Stability During High-Speed Machining, It Is Also An Important Factor In Keeping The Machine Bed Being Easily Deformed. The Temperature Humidity Of The Environment Are Also Important Conditions That Affect High-Precision Machining.

　　Typical Parts Processing Of Precision Machining Center :

　　(1) Box Parts

　　Box Parts Generally Refer To Parts With Multiple Hole Systems, Internal Cavities, Certain Proportions In Length, Width, Height. Such Parts Are More Common In Machine Tool, Automobile, Aircraft Industries, For Example, Automobile Engine Cylinders, Gearboxes, Machine Tool Headstocks, Axle Boxes, Diesel Engine Cylinders, Gear Pump Housings, Etc.

　　When There Are Many Processing Stations The Workbench Needs To Rotate Multiple Times To Complete The Parts, A Horizontal Machining Center Is Generally Selected. When There Are Fewer Processing Stations The Span Is Large, A Vertical Machining Center Can Be Selected To Process One End.

　　(2) Complex Surfaces

　　Like CNC Milling Machines, Precision Machining Centers Are Also Suitable For Machining Complex Curved Surfaces, Such As Aircraft Automobile Parts, Impellers, Propellers, Various Curved Surface Forming Molds. In Terms Of Machining Possibilities, When There Is No Overcutting Blind Spot, Complex Internal Curved Surfaces Can Generally Be Machined Using A Ball-End Milling Cutter For Three-Axis Linkage Machining. The Machining Accuracy Is High, But The Efficiency Is Low. If The Workpiece Has Overcutting Blind Spots, Such As Integral Impellers, It Is Necessary To Consider Using A Four-Axis Five-Axis Linkage Machine Tool. Shenzhen Huiwen Intelligent Manufacturing Technology Co., Ltd. Excels In The Machining Of Complex Curved Surface Parts  Has More Than 10 Five-Axis Linkage Machining Centers. Please Contact Us By Phone Send Us Drawings For Evaluation.

　　(3) Special-Shaped Parts

　　Special-Shaped Parts Are Parts With Irregular Shapes, Most Of Which Require Point, Line Surface Multi-Station Mixed Processing, Such As Brackets, Bases, Templates, Templates, Brackets, Etc. Special-Shaped Parts Have Poor Rigidity, It Is Difficult To Control The Deformation Of Clamping Cutting, It Is Difficult To Ensure The Processing Accuracy. At This Time, The Characteristics Of The Centralized Process Of The Machining Center Can Be Fully Utilized, Reasonable Process Measures Can Be Adopted To Complete Multiple Processes All Processing Contents By Clamping Once Twice. Experience Shows That When Processing Special-Shaped Parts, The More Complex The Shape The Higher The Precision Requirements, The More Advantages The Use Of Machining Centers Can Show.

　　(4) Parts Such As Disks, Sleeves Plates

　　Disc Sleeves Shaft Parts With Keyways Radial Holes, Distributed Holes Curved Surfaces On The End Faces, For Example, Flanged Sleeves, Shaft Parts With Keyways Square Heads, Other Plate Parts With Many Holes, Such As Various Motor Covers. Huiwen Intelligent Manufacturing Technology Has 15 Years Of Processing Experience, Profound Technical Accumulation Experienced Technicians In The Industry. It Has Long Provided CNC Precision Processing With An Accuracy Of Up To ±0.01mm, Supporting The Processing Of Products Made Of Copper, Iron, Aluminum, Steel Various Plastic Materials, Can Be Customized According To Drawings Samples! Welcome Customers To Visit Us!