CNC non-standard customised precision parts machining process

First Of All, CNC Machining Of Non-Standard Precision Parts Has Extremely Strict Requirements On Precision. If You Want To Achieve Ultra-High Precision Smooth Surface, Then The Choice Of Tool Is Very Important. If The Tool Is Worn, The Quality Of The Smooth Surface Of The Part Will Be Significantly Reduced. When Performing Ultra-Precision Machining , The Cutting Speed Is Restricted By The Tool Speed. Huiwen Intelligent Manufacturing Has Long Been Committed To The Processing Of High-Precision, High-Difficulty, Easy-To-Deform Metal Plastic Parts , Small Medium-Volume Production Manufacturing Of Light Alloy Composite Material Parts (Such As Aluminum Alloy, Carbon Fiber, Etc.),  Robot Parts Procurement Customization Services.

Secondly, When Processing Non-Standard Precision Parts , The Lowest Speed Is Preferred. This Is Determined According To The Transmission Cutting Characteristics Of The Machine Tool, Because The Lowest Speed Can Ensure That The Surface Roughness Is Minimized, Thus Ensuring The Quality Of Processing.

Huiwen Tells You That CNC Machining Of Non-Standard Precision Parts Is Selected Based On Cutting Tools, Speed, Depth Other Parameters. Past Experience Tells Us That Selecting Tools With Larger Rake Angles Can Reduce Cutting Force, Reduce Deformation, Gradually Shorten The Contact Time Between The Tool The Chips, Reducing The Basis For The Formation Of Built-Up Edge.

Reasonable Arrangement Of Process Flow Can Improve The Quality Efficiency Of Non-Standard Mechanical Parts Processing . Shenzhen Huiwen Intelligent CNC Processing Factory 'S Non-Standard Parts Processing  Production Has Its Own Set Of Process Flows To Improve Processing Efficiency. Mastering These Process Flows Can Improve CNC Processing Efficiency.

CNC Programming Is The Basis Of CNC Machining . The Quality Of The Workpiece Machining Program Will Directly Affect The Machining Efficiency Of The Workpiece. You Can Cleverly Use The Combination Of Inherent Programs Automated Programming To Reduce The Error Of The CNC System, Flexibly Use The Main Program, Increase Programming Speed, Simplify The Machining Tool Path.

Adjust The Machine Tool Fixture In Advance, The Relative Position Of The Workpiece Tool To Obtain The Required Size. Do Try To Cut Repeatedly To Debug Measure The Size To Adjust The Tool Cutting Amount. This Will Reduce The Processing Efficiency. When The Axle Rotates, The Pulley Is Driven, The Pulley The Axle Will Slip. You Can Use A Drill To Cut A Hole On The Axle To Form An Adsorption Force To Prevent Slipping. The Bearing Rotation Efficiency Should Be Improved, High-Precision Rolling Bearings Should Be Selected. Improve The Accuracy Of Parts That Match The Bearings Improve Processing Efficiency. Huiwen Zhizao Is A Machining Factory With More Than Ten Years Of CNC Processing Experience . It Has A Full Range Of Equipment, CNC Turning/Milling/Grinding/Drilling/Processing. Partners With Parts Processing Needs Are Welcome To Call Us For Quotes.

Modify The Clamping Tool, Disassemble The Vise Jaws, Make The Two Steel Plates Flush With The Jaws, Process Two Threaded Holes On The Jaws Steel Plates, Pad Them With Thick Hard Copper Plates, Fix Them On The Jaws With Screws To Form Durable Soft Jaws. This Can Protect The Workpiece. Usually, The Workpiece Is Positioned First Then Clamped. However, For Workpieces With Strong Plasticity, Clamping Will Cause The Workpiece To Deform. Therefore, For Workpieces With Strong Plasticity, We Clamp Them First Then Position Them To Limit Their Free Range Of Motion.