Hands-on process of CNC parts machining

1. CNC Parts Processing Requirements

For Example, A Simple Part Is Processed, The Part Material Is LY12, It Is Produced In Single Piece. The Part Blank Has Been Processed To Size.

Selected Equipment: V-80 Machining Center

2. Preparation For CNC Parts Processing

Before CNC Parts Processing, Relevant Preparation Work Must Be Completed, Including Process Analysis Process Route Design, Selection Of Tools Fixtures, Program Compilation, Etc.

3. CNC Parts Processing Operation Steps Contents

1. Turn On The Machine Manually Return Each Coordinate Axis To The Machine Origin

2. Tool Preparation

3. Manually Place The Tool Holder With The Clamped Tool Into The Tool Magazine

4. Clean The Workbench, Install Fixtures Workpieces

5. Tool Setting, Determine Input Workpiece Coordinate System Parameters

6. Input The Processing Program

7. Debug The Processing Program

8. Automatic Processing

9. Remove The Workpiece Conduct Inspection

10. Clean Up The Processing Site

11. Shutdown

Huiwen Intelligent Manufacturing Is A Machining Factory With More Than Ten Years Of CNC Machining Experience. It Has A Full Range Of Equipment, Including CNC Turning/Milling/Grinding/Drilling/Machining. Partners With Parts Processing Needs Are Welcome To Call Us For Quotes.

【Business Scope】

1. Provide CNC (Computer Gong, Machining Center), CNC Lathe, Ordinary Lathe, Milling Machine, Wire Cutting, EDM, Multi-Axis (3-Axis/4-Axis/5-Axis) Processing Services;

2. Fast Proofing Speed (Fastest Shipment On The Same Day), Obvious Price Advantage In Bulk;

3. Both Metal Non-Metal Materials Can Be Processed;

4. Provide One-Stop Service Of Drawing Processing Post-Processing;

5. Maximum Processing Size: Maximum 2200mm (Disassembly Is Limited By Size).